Prödkatni̱
01
Tripul ɣɛkthentri̱k landiitä thi̱i̱l butterplai̱ ba̱lbuɔm SS304
Ruac in thia̱k
| Modɛl NO. | D737Ɣ |
| Modɛl ja̱l | Worm Gi̱e̱e̱r |
| Duɔ̱r | Diɔ̱k-Ɛkthentrik Thi̱i̱liŋ |
| Tɛmpi̱rɛciɛr in lät | Mi̱diöm Tɛmpi̱rɛciɛr (120°C |
| Puɔ̱ny Ba̱lbuɔl | SS304 |
| Thia̱ŋ kɛ kui̱ la̱t | Inda̱thti̱rial Yuthɛj, Pi̱w Inda̱thti̱rial Yuthɛj, La̱t Duël |
| Tra̱ni̱thpɔr Pakɛj | Ɛkpörth plai̱wud bɔk |
| Midia | Pi̱w |
| Puɔm römä | Wapɛr |
| Pi̱rɛjɛr La̱t | PN16 |
| Material duŋ Thi̱i̱l Thɔ̱rpëth | Metal mi̱ bum mi̱ ca kum |
| Kɛ ta̱a̱ in go̱rkɛ | ANTHI ATHME B16.5, APII609, APII598 |
| Warɛnti̱ | |
| I̱thpethi̱pi̱këcin | DN50-DN3000 |
Material in Di̱i̱t
| Ɣe̱c | Tha̱ŋdɛ | Läri |
| 1 | Puɔ̱̱ny | ASTM A216 WCB/I̱thti̱ɛni̱th i̱thtiel |
| 2 | Di̱thki̱ | ASTM A351 CF8M |
| 3 | I̱thta̱p | ATHTM A276 316 |
| 4 | Kɔm | F-4 |
| 5 | Buciŋ | F4,RPTFE F4 |
| 6 | O-Riŋ | Bitɔn |
| 7 | Pakniŋ | F-4 |
| 8 | Käp kɔamni̱ | ASTM A351 CF8M |
| 9 | Yok | ASTM A216 WCB |
| 10 | I̱thpli̱t Lɔk Wacɛr | 65Mn |
| 11 | I̱thpli̱t Lɔk Wacɛr | ATHTM A582 303 |
| 12 | Thuɔ̱k Kap | ASTM A351 CF8M |
| 13 | Rip | ATHTM A276 316 |
| 14 | Thra̱th Wacɛr | ASTM A351 CF8M |
| 15 | Riŋ Gland in te rɛydɛ | ATHTM A276 316 |
| 16 | Wacɛr | ATHTM A582 303 |
| 17 | Yi̱ɛ̱th | INKƆNƐL ×750 |
| 18 | Kä raar Gland Kap | ASTM A351 CF8M |
| 19 | Adjuthtiŋ pad | 2Kr13 |
| 20 | La̱tdɛ | Gi̱e̱e̱r,Ilɛkti̱rik Aktuɛtɔr |
Tekni̱kal Data
| Nɔminal Dai̱mi̱ti̱r DN | 50(2")-3000(120") | 50(2")-3000(120") | 50(2")-3000(120") | mm | |
| Nɔminal Pi̱rɛjɛr PN | Kila̱th 150 | Kila̱th 300 | Kila̱th 600 | Mpa | |
| Ɣɔ̱n Pi̱rɛjɛr | Köm | 2.93 | 7.58 | 15.00 | Mpa |
| Thi̱i̱liŋ | 2.07 | 5.52 | 11.03 | Mpa | |
| Tɛmpi̱rɛciɛr in lät | -46-550 | oC | |||
| Didhaany I̱thtandar | Apii̱609 | ||||
| Nhiam kɛ nhiam | API609, I̱thö5752, ATHME B16.10 | ||||
| Plɛŋ Guut | ATHME B16.5/16.47 | ||||
| Inthpɛkciɔn&Tɛth | APII598 | ||||
| Mi̱diöm mi̱ lot rɔ | Pi̱w, Pi̱w ti̱ jiäk, Pi̱w Yiëër, Jiɔm, Ɣöyɔl ɛkw. | ||||
Pröpai̱l kɔmpanɛ
Thärti̱pi̱këcin
Kä tin gɔw kä kɔn
● Runi̱ ti̱ läny 60 kɛ la̱t ba̱lbuɔl ɣɛkpi̱ri̱mɛn kɛ adbanth pröthethiŋ kuakni̱ thëm labörɛtɔri̱ ti̱ di̱t kɛnɛ raw mati̱rial mi̱ ro̱ŋ mi̱ ca tɔ̱w.
FAQ
Q1. Kä mi ɛ faktɔri̱?
A:ɛpuc kɔn nɛy tin lät valve ni kɛ ruɔ̱n 1956 te kɛ run ti leny 60 ti lät valve.
Q2. Ɣän dëë tekɛ mi̱ cä la̱t kɛ kui̱dä?
A:ɛpuc ji̱n ɛ mi̱ ca riali̱kä kɛ kui̱ i̱thtandar,thai̱th,köl,packing,nameplate,mark,etc.
Q3. Kä ji̱n la thöpkɛ tha̱mpuɔli̱?
A: ɛpuc de nɛy tha̱mpuɔli̱ thöp duŋni̱ ɣöö /ci̱ yio̱w tin naŋkɛ ni̱ ŋɔak bi̱ thöp.
Q4. Ɛŋu mi la ŋuɔ̱tdu kɛ kui̱ yiöwni?
A: 30% kɛ nhiam 70% min ci̱ duɔth ɛ ŋot /ka̱nɛ ni ja̱k.
Q5. Tëë kɛ kuak thëm
A: Ɣɔ̱ɔ̱n, te kɔn kɛ kuak thëm pi̱rɛjɛrä, kɛnɛ labörɛtɔri̱ ti̱ di̱t kɛnɛ kuak thëm ti̱ /ci̱ ŋɔak ya̱r.
latdɛ2